Glueing instead of drilling
Practicalities
Accessories are essential for creating a coherent overall look in any bathroom and are used to facilitate the care routine. KEUCO shower shelves, lotion dispensers, towel holders and more are stylish eye-catchers and ensure practical comfort. They are stable on the wall and will impress for many years in daily use - even when glued down.
Not drilled - still lasts
In addition to the usual assembly by drilling, KEUCO also offers the attachment of some products by glueing. These can be installed on many smooth and rough surfaces without drilling using the special adhesive. This avoids drilling holes and dirt, and disassembly is also possible without leaving any residue.
User’s Guide
This is how stable adhesive mounting works:
The bonding surfaces - tiles or shower back wall - as well as the mounting plates must be thoroughly cleaned before bonding. The KEUCO glue set includes a cleaning cloth and an abrasive fleece. The roughened surface ensures that the adhesive adheres even better to the mounting plate.
Once the position for the product has been determined, the fixing points are marked.
Activate the two-component adhesive in the mixing bag according to the instructions on the packaging.
Then apply a hazelnut-sized amount to the centre of the mounting plate.
Press the mounting plate firmly onto the wall at the previously marked location and allow the glue to harden with the cardboard for fixing. The waterproof and ageing-resistant two-component adhesive based on MS polymer is fully cured after just four hours and is characterised by high strength and load-bearing capacity.
Finally, the wall attachment points can be mounted, in which a shower shelf, for example, can be hung. Easy to attach: Complete assembly without drilling.
Nevertheless, it can also be removed very easily and without leaving any residue with a glass scraper and a little silicone cleaner or acetone after the mounting plates have been loosened from the wall with a flat tool such as a spatula.
